E SERIES MOBILE BATCHING PLANTS

complete batching plant for mixing directly on-site

BLEND Plants have created an innovative solution that changes the way we think about concrete. Aggregates are now stored in separate compartments in their batching plants and only mixed when required to produce the end-product. This computer-controlled process reduces the amount of waste that one would normally encounter using the volumetric system.

Using specific materials in each compartment, the mobile batching plant has the capability of mixing a variety of different quality concrete in separate and finite quantities until the compartments need refilling. As a bonus, the entire operation can be controlled by a single operator.

Once the specified dosages have been loaded into the onboard computer, the unit will automatically control the precise weighing of cement, aggregates, as well as dosages of additives and water yielding a certified concrete. Once completed, the automatic washing program will clean the ribbon mixer and the belt using a minimal amount of water.

BLEND Plants have a variety of equipment sizes, including off-road versions for rural sites. Producing concrete on-site thus reduces both time and cost. Concrete, mixed cement, sandblasting, mortars, cold asphalt and recycled concrete are just a few of the options that BLEND Plants’ mobile batching plants are able to produce.

Advantages of the E-Series Plants

Direct mixing plant on site

The need to wait for concrete to be delivered to site with the possibilities of waste and excess ordering are over.
BLEND dry concrete mobile plants can produce precise measurements required by the client.
If the operator has been provided with the correct dosages and volumes, the mobile unit will mix concrete through a single shaft ribbon mixer.

Aggregate storage

Between one and three aggregates can be stored in the separated compartments. Materials and sizes are based on which E-Series model is chosen.

Full Automation

A simple, yet effective software program will provide the fully automated system.

Achievable Certification

Certifiable grade concrete can be produced through the control system. Tolerance levels are achieved with an accuracy of + 1%.

Power supply

Options are available for a diesel or electric engine on board, or truck power take-off.

Easy Mobility

Installation options are can be on a truck, trailer, railway wagon or in a fixed, stationary position.

Mixer Range

BLEND Plants mobile mixer range provides outputs of between 35 m3/h to 70 m3/h. All units are fitted with a single shaft ribbon mixer.

Economical Cleaning

Cleaning both the mixer and the belt is simple and uses only 70 litres of water, which is perfectly suited to African conditions.

Variety of Production Uses

Concrete
Coloured concrete
Fibre-reinforced concrete
Cold asphalt
Mixed cemented concrete

E015

Aggregates: 3,5 m3
Cement: 1,1 m3
H20: 550 lt (opt.)
Emulsion: 300 lt (opt.)
Admixtures: 3×42 lt (opt.)
Output: ≤35 m3/h
Power: 25 Kw PTO
Empty weight: 1.750 Kg 1.350 Kg
5.298 x 2.080 x 2.625 mm

E025

Aggregates: 5 m3
Cement: 2,3 m3
H20: 1.500 /3.000 lt (opt.)
Emulsion: 300 lt (opt.)
Admixtures: 3×42 lt (opt.)
Output: ≤50 m3/h ≤70 m3/h
Power: 25 Kw PTO
Empty Weight: 2.800 Kg 2.300 Kg
4.600 x 1.930 x 2.250 mm

E050

Aggregates: 10 m3
Cement: 3,2 m3
H20: 2.000/4.000 (opt.)
Emulsion: 600 lt (opt.)
Admixtures: 3×42 lt (opt.)
Output: ≤50 m3/h ≤70 m3/h
Power: 25 Kw PTO
Empty Weight: 3.100 Kg 2.600 Kg
5.900 x 2.300 x 2.250 mm

SEVENTY

Aggregates: 12 m3
Cement: 3,2 m3
H20: 2.000/4.000 (opt.)
Emulsion: 600 lt (opt.)
Admixtures: 3×42 lt (opt.)
Output: ≤50 m3/h ≤70 m3/h
Power: 25 Kw PTO
Empty Weight: 3.300 Kg 2.800
6.400 x 2.450 x 2.250 mm